DSpace talpykla

Skirtingų metalo keraminių medžiagų lyginamoji analizė

Rodyti paprastą įrašą

dc.contributor.author Jurkutė, Gabrielė
dc.date.accessioned 2020-08-25T07:12:07Z
dc.date.available 2020-08-25T07:12:07Z
dc.date.issued 2020-06-18
dc.identifier.uri http://dspace.kaunokolegija.lt//handle/123456789/3790
dc.description Dental defects that are visible can cause difficulties: difficult to integrate into society, to communicate, to feel like a full-fledged person. However, tooth loss is restored with removable and non-removable dentures. When choosing non-removable dentures, one of the alternatives is metal-ceramic dentures, these fractures are fracture-resistant, aesthetic and have been used in dentistry for more than 50 years. So by choosing the right ceramics and the right layering technique, you can recreate the most natural smile possible. The topic of this Bachelor thesis is “Comparative Analysis of Different Metal Ceramic Materials”. This study has the following sections: an introduction, the theoretical analysis and conclusions. The list of references is provided at the end of this thesis. Key words: ceramic, metal – ceramic, metal - crown, "Heraceram", "VITA VMK Master", coefficient of thermal expansion, metal alloys. The research problem raised in this work is - what are the advantages and disadvantages of aesthetics, production of dental restorations using metal ceramics "HeraCeram" and "VITA VMK Master"? The object of the research is the advantages and disadvantages of dental restoration using "VITA VMK MASTER" and "HeraCeram" metal ceramics. The aim of this paper is to determine the pros and cons of dental restoration in terms of aesthetics while comparing two types of metal ceramic materials. To achieve the aim of this thesis the following tasks are set: 1. to describe the layering techniques and properties of metal ceramic prostheses of “VITA VMK Master” and “HeraCeram”, 2. to compare the pros and cons of metal ceramic materials of “VITA VMK Master” and “HeraCeram”. Summarizing the work, it can be stated that cermets are favorable in that their wear is close to natural teeth, so there is little vulnerability to antagonists. The SPC of “VTA VMK Master” alloys is 14.0 - 14.4 μm, and the SPC of ,”HeraCeram” ceramic alloys is 13.5 - 14.9 μm, which results in a wider choice of alloys using “HeraCeram”. The initial and resulting temperature range of “HeraCeram” dentin is smaller than that of “VITA VMK Master”, which results in faster results during combustion. “VITA VMK Master” and “HeraCeram” standard ceramic kits do not make much difference, but when looking for a wider range, “VITA VMK Master” offers a wider range of kits with more different ceramic materials en_US
dc.description.abstract Dantų defektai, kurie yra matomi gali sukelti sunkumus: sunku integruotis visuomenėje, bendrauti, jaustis pilnaverčiu asmeniu. Tačiau dantų netekimas atkuriamas išimamaisiais ir neišimamaisiais dantų protezais. Pasirinkus neišimamus dantų protezus viena iš alternatyvų - metalo keramikos dantų protezai, šie protezai atsparūs lūžiams, yra estetiški, o odontologijoje naudojami daugiau nei 50 metų. Tad pasirinkus tinkamą keramiką, ir tinkamą sluoksniavimo techniką, galima atkurti kuo natūralesnę šypseną. Šio bakalauro baigiamojo darbo tema – „Skirtingų metalo keraminių medžiagų lyginamoji analizė“. Baigiamąjį darbą sudaro: įvadas, mokslinių šaltinių teorinė analizė ir išvados, taip pat pateikiamas darbe naudotos literatūros šaltinių sąrašas. Raktiniai žodžiai: keramika, metalo – keramika, metalo - vainikėlis, ,,Heraceram“, ,,VITA VMK Master“, šiluminis plėtimosi koeficientas, metalo lydiniai. Šiame darbe iškelta tyrimo problema - kokios dantų restauracijų naudojant metalo keramikas ,,HeraCeram" ir ,, VITA VMK Master" estetikos, gamybos privalumai ir trūkumai? Tyrimo tikslas – nustatyti dantų restauracijų gamybos ir estetikos privalumus ir trūkumus naudojant skirtingas metalo keramines medžiagas. Tyrimo objektas - dantų restauravimas naudojant ,,VITA VMK MASTER" ir ,,HeraCeram" metalo keramiką privalumai ir trūkumai. Tyrimo uždaviniai: 1. aprašyti metalo keramikų ,,VITA VMK Master“ ir ,,HeraCeram“ sluoksniavimo būdus ir metalo keramikos protezų ypatybes. 2. palyginti metalo keramikų ,,VITA VMK Master“ ir ,,HeraCeram“ medžiagų privalumus ir trūkumus. Apibendrinus darbą galima teigti, kad metalo keramika yra palanki tuo, kad jos dilimas yra artimas natūraliems dantims, todėl mažai pažeidžiami antagonistai. Keramikos ,,VTA VMK Master“ lydinių ŠPK - 14,0 - 14,4 μm, o ,,HeraCeram“ keramikos lydinių ŠPK - 13,5 - 14,9 μm, tai sąlygoja platesnį lydinių pasirinkimą naudojant ,,HeraCeram“. ,,HeraCeram“ dentino pradinės ir gautinės temperatūros intervalas mažesnis negu ,,VITA VMK Master“, dėl šios priežasties degimo metu rezultatas pasiekiamas greičiau. ,,VITA VMK Master“ ir ,,HeraCeram“ standartiniai keramikos rinkiniai didelio skirtumo neturi, tačiau ieškant platesnio asortimento, tai ,,VITA VMK Master“ siūlo didesnį komplektų asortimentą, kuriuose yra daugiau įvairių keraminių medžiagų. en_US
dc.language.iso other en_US
dc.subject keramika, metalo – keramika, metalo - vainikėlis, ,,Heraceram“, ,,VITA VMK Master“, šiluminis plėtimosi koeficientas, metalo lydiniai. en_US
dc.title Skirtingų metalo keraminių medžiagų lyginamoji analizė en_US
dc.title.alternative Comparative Analysis of Different Metal Ceramic Materials en_US
dc.type Other en_US


Šiame įraše esantys failai

Šis elementas randamas kataloge(-uose)

Rodyti paprastą įrašą

Ieškoti DSpace


Naršyti

Mano paskyra